A week of 02.13-02.17

+
The front drawer pins were made, drawer side front tails were made and fitted, grooves for drawer bottoms were made, and drawer backs were prepared.



++
Lance and Dan gave lectures on lathe and grinder safety.



+++
The drawer back pins were made, drawer side back tails were made and fitted.
Drawers were successfully glued up.
One drawer needed to be adjusted by a heat lamp though.


++++
Drawer bottoms were fitted, and drawers were fitted to the case, and can be smoothly pulled out by tape pulls.
I gave 0.02" opening on the top and 0.01" opening on the sides, which could be enough for seasonal and mechanical movement.